Hitachi VARIABLE SPEED DV 14DV Uživatelský manuál stáhnout pdf (Strana 20)

English

HOW TO SELECT TIGHTENING TORQUE

Table 5

NOTE:

The selected content shown in Table 5 indicates the differences according to screw type,

screw size and material used.

CAUTION:

● While operating the Cordless hammer drill, take care not to lock the motor.

If the motor is locked, immediately turn the power off.

If the motor is locked for a while, the motor or battery will be burnt.

● Do not tighten too strongly as the screw heads will be damaged.

Cap

Tightening torque Operation example

position

Approximately 9 in-lbs. (10 kg-cm)

Approximately 15 in-lbs. (17 kg-cm)

Approximately 23 in-lbs. (26 kg-cm)

Approximately 35 in-lbs. (40 kg-cm)

Approximately 43 in-lbs. (49 kg-cm)

Approximately 52 in-lbs. (60kg-cm)

High speed: approximately 78 in-lbs.

(90 kg-cm)(DV14DV)

approximately 96 in-lbs.

(110 kg-cm)(DV18DV)

Low speed: approximately 346 in-lbs.

(400 kg-cm)(DV14DV)

approximately 400 in-lbs.

(460 kg-cm)(DV18DV)

Machine screw

tightening.

Screw tightening for soft

wood material.

Screw tightening for

hard wood material.

Thick screw tightening.

When used as a drill.

Use for drilling bricks

and concrete blocks.

DV14DV•DV18DV-E.E65 6/21/02, 5:06 PM20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Žádné komentáře

Hitachi VARIABLE SPEED DV 14DV Uživatelský manuál Strana 20