Hitachi GR2000 Series Uživatelský manuál Strana 239

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 500
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 238
Filtering/QoS Information
GR2K-GA-0014 1-197
Ver. 07-02
The output priority and queuing priority are determined by a TOS value when
parameters
replace_tos and tos_map ofQoSIPframeconditioninformationor
parameter replace_tos of filter list information are set.
The setting of this command is not required when the DSCP value of Diff-serv is
associated with the output priority and queuing priority using the recommended
valueofthisrouter.TherecommendedmappinglistoftheDSCPvalueandthe
output priority and queuing priority is shown in Table 1-99 Mapping Example of
DSCP Value and Each Class.
Input Format
Settings
Changing settings
Deleting settings
Displaying settings
Parameters
Description: This parameter sets TOS precedence.
Default: See table below
Range of value:
0-7
Description: This parameter sets the output priority class. In the case of
output priority control, used as the output priority class. In
the case of minimum bandwidth and round-robin, used as the
queue number.
Default: See table below
Range of value:
1-8
Description: This parameter sets the queuing priority class.
Default: See table below.
Range of value:
1-4
Zobrazit stránku 238
1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 499 500

Komentáře k této Příručce

Žádné komentáře